What You Need to Know About Floor Screening

Floor screening is a great alternative to sanding a wooden floor. The screening process is much cleaner, faster, and less expensive than sanding. Concrete crack repair epoxy injection is a better option too. The whole process may take from an hour to a full day, depending on the area of the floor. It is usually followed by one coat of polyurethane, either water-based or oil-based. The process is completed by rubbing a buffer over the wood before applying the new coat of polyurethane.

Refresh Your Wooden Flooring

Using floor screening can refresh your wood flooring and postpone a full sanding project. It’s important to remember that screening isn’t effective on floors that are waxed or covered with other products that contain wax. In fact, if you have any of these kinds of floors, it’s best to just replace them with a complete sand and refinish. But before you get started, make sure you remove any carpets, rugs, curtains, or furniture. Also, make sure to paint the walls before you start screening the floors.

Remove Scratches

Floor screening is a great option for buffing up a wood floor. It’s an effective way to remove scratches and dull gloss finishes. Before you start, make sure you have a good power source. If you live in an older house, the fuses can blow if you overload the machine. Before you begin, it’s best to remove furniture, rugs, and curtains. It’s also a good idea to clean the floor thoroughly before you start the screening process.

Offers a Protective Layer

Once you’ve completed screening the hardwood floor, you’ll need to apply a protective finish. A protective finish is essential for a beautiful result. In addition, screen-applied polyurethane will stick better to the wood. During the screening process, the top coat of finish is roughed up. If you have a fresh finish, you’ll only need to apply a new coating every two or three years.

Screening is a great way to revitalize your wood floor. It can also be a good way to postpone sanding. But be aware that it will only work on floors that are already finished with a polyurethane. Moreover, it won’t work on floors that have been waxed or have any type of waxed products on them. Those that are heavily worn out should be sanded and refinished.

To Conclude

Screening is used to remove old, dull finish. It can be used on wooden floors. However, it should be done with care. For that you need to consult an epoxy flooring company in Dubai. You should avoid screening hardwood floors with wax or other products as they won’t work as well. Then, make sure you have a good power source. It can be dangerous to overload a circuit. When you use screening, remove all furniture, rugs, and curtains to prevent accidents and accidental spills.